Handlekurven er tom
Informasjon
The G90 HF 20W structure is based on 24-bit data size at 48kHz sampling rate providing excellent transmit and receive performance and the G90 is highly configurable for a rich user experience.
Xiegu G90 Features
- High performance front end narrowband ESC preselector
- Frequency range of 0.5~30MHz, SSB/CW/AM
- 1.8 inch high brightness color TFT LCD screen
- ±24k bandwidth spectrum display with waterfall
- Software defined narrowband filter (CW mode: 300Hz)
- Detachable Front Panel/Display Unit
- Up to 20W of RF power
- Built-in wide range automatic antenna tuner
- I/Q output for interfacing with a PC or XDT1 panadapter
Xiegu G90 Receiver Parameters
- RX frequency range: 0.5MHz to 30MHz
- Modes: SSB/CW/AM
- RX sensitivity: better than 0.25uV @12dB Sinad (PRE: ON) Machine dynamic range: 90dB
- Adjacent channel suppression: 60dB
- Audio output power: 0.5W@ 4O
- Standby current: 750mA @ Max
Xiegu G90 Transmitter Parameters
- TX frequency range: all amateur bands 1.8 to 30 MHz
- Modes: SSB/CW/AM
- RF output power: 20W
- Spurious suppression: =50dB
- Carrier suppression: =50dB
- Sideband suppression: =50dB
- Transmit working current: 8A @ Max
Xiegu G90 Antenna Tuner Parameters
- Initial tuning time: =12s
- Re-entry tuning time: = 2s
Xiegu G90 General Specifications
- Operating voltage range: 12 ~ 15V DC
- Operating temperature range: 0 ° C ~ 55 ° C
- Frequency stability: ±2ppm (after 30 minutes of power on)
- Size: 120*45*210 mm (without protrusions, head unit combination status)
- Weight: about 1kg
Xiegu G90 Recommended Accessories
- XPA125 100W Solid State Linear Amplifier
- CE-19 Expansion Port for easy PC connection
- ModMic boom microphone (this adapter needed)
- ANjo EFW40-10P Ultra Light 3-Band Wire Antenna
- XDT1 Panadapter/Data Terminal (not yet available)
Vi kan også åpens på alle frekvenser med nyeste firmware......
- Pris: 500,- Send mail
Andre Videoer om G90
